Payment & Shipping Terms:
|Upstream Ports:||16 * 10 / 100Mbps RJ45 Ports||Downstream Port:||1 * 1.25Gbps GEPON Port|
|WEB Management:||Support||OAM Design:||Support|
GEPON solution equiment 16FE ports EPON ONU metal shell for smart hotel , smart
commnunicaty and video monitoring project
About PON introduction
Passive optical network (PON) is a very significant class of fiber access system in the world and it enjoys a dominant position in the access market. GPON and EPON are the two classifications of PON. The primary differences between the GPON and EPON lie in the protocols used for upstream and downstream communications. This article will introduce PON, GPON and EPON sequentially.
Passive Optical Networks (PON)
A PON is a fiber network that only uses fiber and passive components like PON splitters and combiners rather than active components like amplifiers, repeaters, or shaping circuits. Thus PON network costs significantly less than those using active components, but it has a shorter range of coverage limited by signal strength. An active optical network (AON) is able to cover a range to about 100 km (62 miles), while a PON is typically limited to fiber cable runs of up to 20 km (12 miles). PON is also called FTTH (fiber to the home) network.
PON point to multi-point (P2MP) network
The typical PON arrangement is a point to multi-point (P2MP) network where a central optical line terminal (OLT) at the service provider’s facility distributes TV or Internet service to as many as 16 to 128 customers per fiber line. Dividing a single optical signal into multiple equal but lower-power signals, the optical splitters distribute the signals to users. An ONU (optical network unit) terminates the PON at the customer’s home. Usually, ONU communicates with ONT (optical network terminal). The ONU/ONT may be one device.
16 ports GEPON ONU
NTW-E171600H series is a MDU device designed by natywish, integrated Ethernet switch and optical network unit ONU function,can combine well with OLT to built an efficient EPON solution,well satisfies the application of broadcast and television bidirectional network and FTTO/FTTB.Completely meet the standard of IEEE802.3ah and YD/T 1475-2006.
16*10/100base -T ethernet RJ45 ports.
1* 1.25G PON port.
|System capacity||Splitting ratio:1:64.|
Uplink and downlink symmetric:1Gbps.
Rx sensitivity: no less than-30dBm.
Security : ONU authentication mechanism.
Network coverage radius : 30km.
IEEE 802.1D, Spanning Tree.
IEEE 802.1Q, VLAN.
IEEE 802.1w, RSTP.
IEEE 802.3ad physical link static / dynamic aggregation(LACP).
Ethernet – II, Ethernet-SNAP.
IEEE 802.3ad VLAN Stacking( Q in Q).
Back pressure flow control (half duplex).
IEEE 802.3x flow control (full duplex).
IEEE p802.1p, CoS.
WRR,SPand FIFO queue scheduling algorithm.
Support 802.1P/DSCP priority Mark/Remark.
Uplink and downlink speed limiting per ONU.
IEEE802.1Q VLAN relay.
QinQ,and support flexible QinQ.
Multicast VLAN,controlled multicast .
Single direction link detection protocol prevents the survival tree loop.
Expansion slot, EPON optical module hot plug.
EAPS fast loop protection function.
EPON optical path protection.
Limit the maximum number of users per port.
Message storm control.
ACL access control function of data stream.
PON port transmission data encryption.
|Configuration and management||
CLI, Web, SNMP, TELNET,clustering etc management.
RMON v1, 1,2,3,9 group.
Software upgrades and bootrom upgrades can be made through TFTP and FTP.
Local or server record syslog.
Command prompt in Chinese and English.
ping, traceroute network testing tools.
Installation: rack mount / wall hanging.
Working environment:-30℃～55℃；10%～90% non-condensing.
Storage environment:-40℃～80℃；5%～95% non-condensing.
Input voltage:AC100～240V,input frequency:47～63Hz.
16 ports industrial EPON ONU
Contact Person: Echo Wang