Payment & Shipping Terms:
|Device Name:||POE GEPON ONU MDU 4 Ports With POE||Service Interface:||4* 10/100/1000M Ethernet Ports With POE|
|POE:||4||Application:||FTTx IP Camera, Video Monitoring, HD IPTV|
|POE Standard:||IEEE802.3af15.4W||GEPON Port:||1|
Mini 4 ports EPON POE ONU MDU , upstream and down stream symetrical 1.25Gbps
with 4 * 10/100/1000M RJ45 ports , apply in IP camera , video monitoring project
Application of TDM-PON
TDM-PON types include ATM PON (APON), Broadband PON (BPON), Ethernet PON (EPON), Gigabit PON (GPON). Now EPON and GPON are extensively used in the telecommunication networks.
Application of EPON
Ethernet PON (EPON) is a PON-based network that carries data traffic encapsulated in Ethernet frames (defined in the IEEE 802.3 standard). A typical EPON system consists of three components: optical line terminal (OLT), optical network unit (ONU), and optical distribution network (ODN). Utilizing PON topological structure to achieve the access of Ethernet, EPON is equipped with the dual advantages of PON and Ethernet including low cost, high bandwidth, strong scalability, excellent compatibility with Ethernet to facilitate network management, etc.
Based on where ONUs are deployed
EPON application mode can be fiber to the curb (FTTC), fiber to the building (FTTB), and fiber to the home (FTTH)
NTW-E17400P series is a digital POE ONU, designed by NATYWISH,provides 4*10/100Mbps self-adaptation POE port ,support IEEE802.3af15.4W and IEEE802.3at30W power supply standard.It can automatically identify the electrical equipment and provide power, meet the IEEE802.3af/at standard .For the connected equipment that non electricity,it would automatically stop the power supply.It can be connected to the network camera, IP telephone and wireless AP network equipment and supply power and cooperate well with center OLT.It can achieve remote fault diagnosis and location ,reduce maintenance workload,Iron shell design,applicable to FTTB/FTTH and other application environments.
1. Meet IEEE802.3/802.3ah standard.
2. Automatic discovery and registration.
3. Support DBA and all kinds of SLA .
4. Support IEEE802.1DRSTP.
5. Support IGMPSnoopingV2 multicast.
6. EMI and ESD protection certification.
7. Support VLAN.
8. SNTP client side automatic time synchronization.
9. Rich and powerful OAM with remote management capabilities.
10. Support port speed limit, loop detection and port isolation.
11. Support state detection and automatic fault location.
12. Support power-off alarm.
13. Each PoE power supply port can automatically identify whether or not a power supply is connected to a standard receiving device to power or power it off.
14. Support IEEE802.3af15.4W and IEEE802.3at30W standard.
|4*10/100M BASE-T RJ45ports (self adaptation).|
|Uplink and downlink symmetric, 1Gbps transmission rate.|
|Network coverage radius: 30km.|
|High sensitivity optical receiver: no less than -26dBm.|
|Security: ONU authentication mechanism.|
|IEEE 802.1D, Spanning Tree|
|IEEE 802.1Q, VLAN|
|IEEE 802.1w, RSTP|
|Ethernet – II, Ethernet-SNAP|
|Service quality||Back pressure flow control (half duplex)|
|IEEE 802.3x flow control (full duplex)|
|Prevent Head Of Line|
|IEEE p802.1p, CoS|
|4 dispatch queues per port map the 8 priority levels of the 802.1p|
|WR,SP and FIFO queue scheduling algorithm|
|Port speed limit|
|IEEE802.1Q VLAN relay|
|POE||Power standard:IEEE802.3af15.4W IEEE802.3at30W|
|Working mode:Automatic identification of point equipment, automatic power supply, power interruption|
|Network security||IEEE 802.1x, Port access control, support local and remote authentication,EAP finality or pass through.|
|Limit the maximum number of users per port|
|Message storm control|
|Configuration management||CLI, Web, SNMP, TELNET management etc.|
|Software upgrades can be done by TFTP and FTP|
|Local or server logs syslog .|
|ping, tracerouten etc|
|Size||170 mm(W) x 98 mm(D) x 28 mm(H)|
|Install :plug and play|
|Heat dissipation||Long time to use(24hours),equipment heating does not cause performance degradation and device deformation damage.|
|Environment||Working environment:-40℃～65℃；10%～85% non-condensing|
|Storage environment:-40℃～80℃；5%～95% non-condensing|
|Power supply||Power adapter type: switching power adapter|
|Input rated voltage:110V～240V,50/60Hz|
|Input voltage fluctuation range: ±20％/ ±10％|
|Safety wire:Install non renewable temperature protection at the input port.(or temperature resistance)|
|Certification requirements: CCC , CE certification or customer designated certification.|
Contact Person: Echo Wang