Payment & Shipping Terms:
|GE Port:||8||Power Supply:||DC + AC Dual Power Supply|
GEPON OLT optical line terminal 8 ports EPON OLT with 8 PON ports , 8GE ports and
4 SFP slots for Ehternet passive optical network
Based on the Ethernet standard 802.3, EPON 802.3ah specifies a similar passive optical network with a range up to 20 km. EPON uses WDM with the same optical frequencies as GPON and TDMA. The raw line data rate is 1.25 Gbits/s in both the upstream and downstream directions.
EPON technology provides bidirectional 1Gb/s links using 1490nm wavelength for downstream and 1310nm wavelength for upstream, with 1550nm wavelength reserved for future extensions or additional services. EPON is fully compatible with other Ethernet standards, so no encapsulation or conversion is necessary when connecting to Ethernet-based networks on either end. The same Ethernet frame is used with a payload for up to 1518 bytes. As Ethernet is the primary networking technology utilized in local area networks (LAN) and now in metro area networks (MAN), no protocol conversion is needed.
Advantages of Optical Ethernet (EPON)
• Low cost due to economies of scale
• ~320,000,000 Ethernet Ports deployed worldwide
• LANs are ~90% Ethernet today • Byte life begins and ends as IP/Ethernet
• Ease of Scalability, Management •
Cable Modems and DSL Modems have Ethernet Interfaces
• Many IP/Ethernet chipset solutions to chose from
• Future cost curve of components (electrical, optical) steep for Ethernet
• Ethernet is a Universal standard, no variations • CLECs (ELECs) can start with IP centric networks
• Carriers are now offering Ethernet WAN Services
• Ethernet beat FDDI, Token Ring, Fibre Channel, ATM in the LAN
• Work force Solution: Many LAN technicians comfortable with Ethernet
NTW-E18008C series is a cassette OLT switching device designed by NATYWISH, provides 8 * downlink PON ports , 8* uplink ethernet RJ45 ports, 4* optical SFP slots, only 1U height. 1. Provide a high density PON port, overall unit can support 512 ONU terminals, capacity is larger than regular cassette OLT, every PON port supports splitting ratio 1:64, PON optical transceiver is hot plug design, support 20km transmission distance.
1. EPON: NTW-E18008C series complies with IEEE802.3ah and YD/T 1475-2006 standard.
2. System capacity: Single PON port can support the access of 64 terminals, the overall unit can support 512 ONU terminals.
3. Uplink port: support many different types of metropolitan area network interface combination, according to network situation , select 1000M or 10000M port.
4. Device size: 1U, occupies little space in the computer room,less power consumption,reduces business operating cost.
5. High reliability guarantee, support dual power supply.
1. Provide a high density PON port, overall unit can support 512 ONU terminals, capacity is larger than regular cassette OLT, every PON port supports splitting ratio 1:64, PON optical transceiver is hot plug design, support 20km transmission distance.
2. Support PON optical fiber redundancy protection,automatic link road protection switching in the case of optical fiber failure.
3. Support ethernet function, provide effective isolation guarantee mechanism, VLAN isolation, port protection,MAC address binding, IP address binding, port speed limit, queuing technique ,flow control technology etc.
Packet Forwarding Rate(IPv4/IPv6)
|8*PON ports,8*10/100/1000 Base-T ports,4*10G SFP slots.|
Dual power supply,support dual AC input,dual DC input and AC+DC input
AC:input 90～240V 47/63Hz,
Full Load Power Consumption
1.8*PON ports,8*10/100/1000Base-T electrical port, 4*SR/LR/ER port.
2.Dual AC power supply,dual DC power supply,DC+AC power supply can be optional.
Contact Person: Echo Wang